It’s a proven fact that burglars have a harder time breaking into buildings with high-grade sectional overhead doors Narellan. The high tensile strength steel used for making your silent watchman makes breaking-into your building almost impossible without making considerable noise to get caught.
However, this could all change if you choose to ignore any abnormalities on your door. Squeaky sounds while opening, rusty surfaces and edges as well as a myriad of other faults which will be mentioned in this article are all signs you should be on the lookout for. Ignoring these signs will leave your business or home at risk if left to develop and further degrade your door.
If you’ve been noticing weird sounds or unusual behaviour from your door, you might just need to call your professional repair-man. It could also be just a small problem you can fix by yourself. To differentiate which from which, continue reading to find out.
Here are the signs you should look out for during an inspection of your sectional overhead door.
Sign no. 1: Your door opens and closes slower than usual.
This is a clear sign you should call the maintenance team for servicing. Potential causes of faults like this are traced to grinding caused by poor lubrication between the track, bracket, rollers and hinges.
Proper lubrication of the joints should solve this problem as this is the usual cause of the problem. However, things are always better if you leave all the hard work to the pros.
Sign no. 2: Unbearably loud sounds when opening or closing your door.
Causes of this problem are usually traced to:
Loose bearings and parts.
Poor lubrication during maintenance.
Improper installation of the door (caused by employing frauds or installing it yourself without professional help).
Loose bolts and nuts at joints. (normally caused by wear and tear of the bolts and nuts).
Unbalanced doors.
Bent metal rail or tracks (could pose a problem if not taken care of quickly).
The most obvious remedy to this problem is to inspect your overhead door properly during your leisure time ensuring you lubricate the moving parts, tighten loose joints, and call for professional help when necessary.
Sign no. 3: Violent shaking when opening the overhead door
This could be traced to a problem with the rollers. However, that isn’t the only cause as damaged screws or hinges also cause shaking of the overhead door.
If left unattended to, the door becomes dangerous as it slides shut at will and goes out of place simply because the weight of the door isn’t supported by the hinges any more. You don’t want your children or employees under the door when that happens.
The best solution to this problem is to call for professional help. Trying any DIY repair techniques might worsen the situation making replacement unavoidable.
Sign no. 4: The door doesn’t open
A door that won’t open is either jammed on the tracks or in the engine. Although the problem may be caused by an electrical fault. Once this is noticed, you should call your repair service professional immediately so it doesn’t become impossible to fix.
Sign no. 5: Your overhead door falls off its tracks
Sadly, this is caused more by their owners than natural causes or negligence. These doors fall off their tracks if their owners crash into them more often than usual.
During rush hour and emergencies, crashing into your overhead door is almost impossible to avoid. This can lead to serious damages occurring to your garage door such as:
Shifting them completely out of track.
Bending the metal surface.
Promoting wear and tear in moving parts.
If your door falls off its tracks, NEVER try to put them back in place. This could be fatal if not repaired professionally. To avoid unnecessary loss of life, ALWAYS call the repairman in times like this.
Sign no. 6: Rust formation around important parts of the door
Rust is obviously a sign there has been some degradation on your overhead door. It is caused when iron which is a major component of steel is exposed to moisturized air (or water and air) for an extended period of time. The chemistry which happens during this time leads to the formation of rust.
Thankfully, this is a problem that can be solved using DIY means. All you need to do to take care of things is to use dishwashing soap or any other mild cleaning agent to clean to the affected area. A cloth soaked in vinegar should also do the trick.
Great care and attention should be given towards spotting this seemingly unimportant but serious problem. Failure to take care of the rust could defunct your overhead door making it lose its integrity.
Importance of employing professionals
Problems like rust formation and objects inhibiting door movement can be taken care of by the building owner. However, calling a professional repairman always beats having to repair everything yourself.
It’s always okay to be aware of the possibility of a problem but it’s best if you know whether or not the problem is something you can handle.
You should take care not to forget that proper maintenance and usage of your sectional overhead doors not only increases durability but also makes faults like these mentioned above less rampant.
Comments
Post a Comment